Advanced – Ground Balance
Wide range to ground balance from saltwater to heavily mineralized ground (ironstone) without switching to special modes.
True All Metal Mode
Detects all types of metal and provides the greatest possible detection depth and sensitivity
Designed for use in wet, humid and dusty environments. Can be submerged in water to 10-foot (3m) depth
Allows user to audibly identify iron targets when using a DD searchcoil
User can manually adjust the audio threshold (the constant background “hum”) to better hear targets
Fast Track Ground Balance
Automatic feature that allows the user to quickly ground balance the detector in mineralized soil conditions
Ground Track (Automatic)
Detector continually measures ground mineralization and automatically adjusts itself for optimum performance
This non-motion All-Metal Mode function is used to precisely locate a detected target’s position
– 20″ Deepseeker Mono Coil –
This is the largest Searchcoil available for the Garrett ATX metal detector. This coil offers extreme depth on larger targets. Now you can easily pinpoint gold and buried treasures at even greater depth. This Searchcoil is perfect for hunting in highly mineralized areas such as salt water beaches. This large sized coil is perfect for locating large deep treasures with the ATX metal detector. The Mono Searchcoil winding produces smooth operation in the toughest ground conditions. Use for locating larger and more deeply buried objects. Includes surface debris elimination.
– MS-2 Headphones –
As with all Garrett products, special care goes into the design and production of the Garrett Master Sound II (MS-2) Headphones. This particular model is built for a special few Garrett detectors: AT Pro, ATX, AT Gold and Sea Hunter. Field tested for quality and approved for the above Garrett detectors. Garrett says, “Find More Treasure” with our wide dynamic audio range speakers that enhance weak signals. Comfortable ear cushions and adjustable headband guarantee a comfortable fit for every head size. Good wide area of operation; 8 ohms per channel speaker impedance, frequency response: 30-18,000 Hz. A full length 10 foot reinforced coiled cord with the most IMPORTANT feature; a Garrett AT 2-pin water tight connector.
– 15 x 20″ Closed Coil Cover –
This 15×20″ coil cover fits the Garrett ATX metal detector. It easily snaps onto the bottom of your expensive Searchcoil to protect it. This cover also gives added protection against cuts, slits, and excessive wear. No need to remove. Absorbs shocks and moist grass static. Keeps coil clean and scratch free. Made in the USA from a form fitting high-impact plastic. Very highly recommended. No tools required. Does not reduce detection depth!
– 11″x13″ DD Closed Searchcoil –
This is a replacement of the standard Searchcoil for the Garrett ATX metal detector. The 11×13″ DD coil is preferred where the most severe mineral conditions exist. Garrett exclusive sliding mount design provides the advantages of a center-mounted coil (balance, easy tilting). Solid coil design is more resistant to impact. Front half of solid coil’s top surface provides a large, flat surface to spread a handful of dirt to sift for a tiny nugget. Ideal coil for prospectors and relic hunters for improved gliding/scrubbing over brush, rocks, etc.
– Soft Storage/Travel Case –
Protect your investment with the Garrett Soft Case, Universal 5 Pocket Metal Detector Carry Bag in Digital Camouflage. This bag works with all Garrett models. This padded travel and storage case includes a handle, full zipper and backpack straps. Just stow and go! This bag holds any Garrett detector without the need to remove the Searchcoil. Length: 46″.